G&G SMC-9 Folded stock backplate (part :GHJ-A01)
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
Folding stock backplate found as part GHJ-A01 for the SMC-9.
- Ocena
- 0 / 5
- Polubienia
- 2
- Pobrania
- 22
- Wydruki
- 0
- Wyświetlenia
- 177
- Oceny
- 0
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- Other Sports
- Licencja
- Creative Commons — Attribution
A recreation of the folding stock backplate for the SMC-9.
As the original part typically breaks at the hinge point and is hard to aquire without contacting G&G directly , I decided to design this 3D printed version with works really well.
This works with the original hardware such as:
Brass bushing
Threaded rod
Folded stock spring, plunger
pin
No post-processing required apart from a little force when inserting the brass bushing and the threaded rod.
Recomended settings:
Layer height: 0.2mm ( with 0.4 mm nozzle)
Walls: 4
Infill: 15% Gyroid
Top z distance: 0.15-0.2
Support: Tree , 30% threshold
Printer must be calibrated for overhangs and supports
If you have any questions please leave a comment and i will get back to you.