Qidi QPro hotbed upgrade kit accessories
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
Meanwell LRS150+SSR mount and build plate corner stopper to use with Funcssor hotbed upgrade kit for Qidi Q1Pro.
- Ocena
- 0 / 5
- Polubienia
- 3
- Pobrania
- 4
- Wydruki
- 0
- Wyświetlenia
- 120
- Oceny
- 0
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- Other Printer Parts & Upgrades
- Licencja
- Creative Commons — Attribution
Here is a couple models for Q1Pro hotbed upgrade kit made by Funcssor.
The first is mount designed to replace factory noisy PSU to Meanwell LRS-150 PSU and SSR. LSR-150 is obviously silent because of passive cooling. SSR used to control 500W silicone heater. A 6pcs M4 (OD 6mm, length 5mm) threaded inserts are used in mount holes for printer case and SSR.
Also you need following things:
1. 4pcs M4x40 screws to attach this mount to printer case (existing M3x35 screw are a little bit shorter than needed);
2. 2pcs M4x6 or M4x8 screws to fix SSR on mount.
The second model is build plate stopper to replace factory stoppers because of thickness of kit heated bed. Here is only right side stopper model - just clone and mirror to print left side one.
You need 2psc M3 8mm screws for each stopper (4pcs total) to mount them on hotbed using dedicated holes on sides