Ender3 V2 Neo - MinionD Shroud CR-Touch Setup
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
Remix of the Mini Minion Fan ducts to use stock fans w/ custom bracket to re-position the CR-touch.
- Ocena
- 0 / 5
- Polubienia
- 3
- Pobrania
- 8
- Wydruki
- 0
- Wyświetlenia
- 125
- Oceny
- 0
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- Creality Parts & Upgrades
- Licencja
- Creative Commons — Attribution — Noncommercial
Remix of a remix of a remix to install an upgraded fan shroud that utilized stock fans. Wanted to share this to hopefully help someone out since I spent some time tweaking this setup.
Wanted to upgrade my Ender 3 V2 Neo fan ducts but was having issues finding something that would fit correctly. I believe the V2neo has a different extruder and mount than a standard Ender3. When I first printed the MinionD and attempted to mount it I found that the threaded posts that the extruder mounts too are a little longer as well as the CR touch now set below the nozzle.
I designed a custom bracket for the CR-Touch that moved it up approx. 10mm and to the left approx. 15mm to get the probe far enough above the nozzle to not interfere with prints. Designed to use 2x 3mm heat inserts pressed into the back to remount the CR-touch to the bracket.
I also remixed an already remixed version I found on Thingiverse to compensate for the longer extruder mount threaded posts and shore up the gap I was finding on the front fan.
Uses stock fans and wiring.
Probably one of the best mods I did to this printer after the direct drive upgrade. Solved my issue with bridges/curling.
Parts List:
- qty. 2 - 3mm Heatserts
I also used a support brace with a velocity stack built in found on Thingirverse as seen in the pictures, it can be found here if interested:
https://www.thingiverse.com/thing:5007482