Arcs TinkerTownGames Token holder

 I use a neoprene map for Arcs, so I didn't need the space for the folded cardboard map (which never really lay flat properly). I modified the original token holder model from Smilingbandit2's complete Arcs box organiser by removing the token-holding tubes. extending the depth and modelled slots to fit the gorgeous metal and resin tokens from TinkerTown Games. The model is very dense and rather unoptimized, but prints well enough.

 I also modelled and printed a simple base spacer to elevate the card holders to be level with the bottom of the dice tray (not included here, but I can upload if requested). Everything but the map fits well into the box. I keep the neoprene map separately, in the tube that it was delivered in.

I primed and painted the inner slots with acrylic paint to match the token's outer ring of color, and finished with glossy/matte varnish. 

Printed using 0.6mm Revo nozzle with 0.20mm layer height at 15% fill on MK3S+ with Polymaker Polylite PLA CF. I would have used Prusament Galaxy Black PLA,  but I had run out :(