Owala FreeSip 24oz water bottle handle
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
A ring around the bottle, which makes it easy to attach somewhere with a carabiner.
- Ocena
- 0 / 5
- Polubienia
- 7
- Pobrania
- 20
- Wydruki
- 0
- Wyświetlenia
- 232
- Oceny
- 0
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- Outdoor Sports
- Licencja
- Creative Commons — Attribution — Noncommercial
I messed up the measurements in Solidworks by a factor 10. So import this model in your 3D-slicer and resize to 10%. Once resized, you might want to add supports for the hand/carabiner hold. I haven't tried printing without. I designed it to print in TPU, not sure if other fillaments work as well.
I printed with 25% honeycomb infill.
The extremely thin part in the middle of the ring is too thin to print. please just forget about it.
I needed to add very specific supports for it to print and I tared it off while removing the supports. In my second print, I discarded these specific supports, so the thin ring didn't print at all and still fits like a glove.
Your printer will probably don't even bother printing this part and that's absolutely fine.
Water bottle is still 100% leakproof if you tighten it correctly and it still drinks the same. I just haven't tested how long this print will survive if I abuse it, but it feels pretty solid.