Waterproof Cable Gland
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
Waterproof cable gland for electrical JB entry. Resize to your needs with a parametric Fusion 360 file.
- Ocena
- 0 / 5
- Polubienia
- 46
- Pobrania
- 287
- Wydruki
- 0
- Wyświetlenia
- 1163
- Oceny
- 0
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- Electronics
- Licencja
- Creative Commons — Public Domain
I designed a waterproof cable gland for strain relief as the only ones I could find weren't water tight. The design is based on commercially available glands but is modified to be more printable and customizable.
You will need TPU for the waterproofing O-ring and seal, and PLA+, ASA, PETG, PA, or the like for the rigid parts. Normal PLA is not recommended as it doesn't have enough flex for the clamping mechanism. Commercially available glands are made of Nylon.
Included are a STEP file if you want to print a ¾" KO gland sized for 12/3 SOW, or use the included Fusion 360 file and edit the favourited parameters to suit your needs.
- “cable_OD”
- “printer_tolerance” (for thread tolerance)
- "KO_OD" (look up the real OD as trade names are not the same as the real OD. For example, "¾" KOs are actually 1.05")
Disclaimer: make sure you're competent to work on electrical systems if you intend to use with anything more than extra-low voltage! Also these are not going to be certified electrical components so do not use in any projects that require inspection (no fire rating etc.)!