1 / 5
Stokke Tripp Trapp Sicherheitsgurt Halterung | seatbelt bracket — zdjęcie 1
1 / 5

Stokke Tripp Trapp Sicherheitsgurt Halterung | seatbelt bracket

Zamów wydruk tego modelu

Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.

Zapisane na tym urządzeniu.

Halterung um den Sicherheitsgurt am Tripp Trapp zu befestigen | Bracket for attaching the seatbelt to the TrippTrapp

Ocena
0 / 5
Polubienia
4
Pobrania
136
Wydruki
0
Wyświetlenia
660
Oceny
0

Aktualizacja u źródła:

Informacje o modelu

Źródło
Printables
Kategoria
Kitchen
Licencja
Creative Commons — Attribution — Noncommercial — Share Alike

Halterungen um den 5-Punkt-Sicherheitsgurt von Stokke am Tripp Trapp befestigen zu können. Montage erfolgt wie beim Original. Wurde 3D-Druck-freundlich konstruiert: Möglichst wenig Überhänge und integrierte Supports.

Gedruckt mit vier Top und Bottom-Layers, vier Wänden und 15% Infill.

Montagevideo von Stokke: Wie montiere ich den Stokke Tripp Trapp Gurt? How to install the safety harness (European version)?

--------------------------------------------------------------------------------------------------------------------------------

Mounts for the Stokke 5-point safety harness for the Tripp Trapp. Installation is the same as for the original. Designed to be 3D print-friendly: minimal overhangs and integrated supports.

Printed with four top and bottom layers, four walls, and 15% infill.

Assembly video from Stokke: Wie montiere ich den Stokke Tripp Trapp Gurt? How to install the safety harness (European version)?

Tagi