Completely printed bottle opener
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
100% printed. Doesn't need a coin. Extremely durable and easy to print.
- Ocena
- 4 / 5
- Polubienia
- 23
- Pobrania
- 163
- Wydruki
- 1
- Wyświetlenia
- 775
- Oceny
- 1
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- Tools
- Licencja
- Creative Commons — Attribution
This opener uses a curved prying edge that catches on a substantial amount of the sharp cap edge, the extra contact spreads out the opening force, so the opener is much less likely to be damaged by the cap edge.
The cap lever covers the whole top of the cap to keep bending to a minimum, and the lever lip forces the cap into the opener so you only have to lift vertically to the bottle.
-No metal: does not need a coin or other metal parts
-Opens bottles easily and quickly
-Durable, can open lots of bottles
-Ergonomic, fits in the hand well
-Does not bend the cap
-Small enough to fit in pocket
-Easy to print
If you want to stick it on a fridge or retain the cap, print the version with the hole and add a 6x3mm magnet.
Printing instructions:
Print with 4 perimeters or 1.6 to 2 mm shell thickness and 20-25% infill.
Having a thick shell is the most important part, as it makes the bottle opener durable.
I tried PETG and PLA and both work fine.