1 / 3
Grab Handle - w/ Configurable Bodies, 107/135/160mm bolt center-to-center — zdjęcie 1
1 / 3

Grab Handle - w/ Configurable Bodies, 107/135/160mm bolt center-to-center

Zamów wydruk tego modelu

Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.

Zapisane na tym urządzeniu.

Split into multiple bodies in the STL for length modification (bolt center to center - can scale the middle X- section)

Ocena
5 / 5
Polubienia
6
Pobrania
49
Wydruki
1
Wyświetlenia
160
Oceny
1

Aktualizacja u źródła:

Informacje o modelu

Źródło
Printables
Licencja
Creative Commons — Attribution — Share Alike

Split into multiple bodies in the STL for length modification (bolt hole center-to-center - can scale the square profile cross-section). Did the best with what time I had for the least amount of work…

Most slicers allow you to move/translate a body a specific distance. Move the outer legs to your specified distance to get the desired hole center-to-center distance then scale the squarish profile of the handle (on each side) in one direction to meet the outer legs. Don’t even need to unite the bodies as the slicer will consider them one piece as long as there are no gaps.

Printing

Material dependent on use case. PLA for indoors, ASA/ABS/PET-GF/PET-CF for outdoors (Maybe PA-CF but depends on if moisture/water/creep is an issue)

I printed my versions out in PET-GF and solid infill - came out perfect. 

Original model found on Thingiverse (see link in page)

I've added my own remodeled versions for 107mm and 135mm to go on an aluminum boat of my friends. 

Purchasing

If you don't have a 3D printer and would like to purchase this item, I would be happy to print and ship it to you. Send me a message at [email protected]. Located in USA but will ship globally if required. Shipping will vary and affect cost. 

If you are looking for a printer, feel free to check out my affiliate link to the new Centauri Carbon! I bought this printer with my own money, but I'm enjoying using it so much that I feel everyone should give it an honest look. These handles were printed on it. I appreciate the support so I can keep making/reverse engineering cool models. 

https://elegoo.sjv.io/LKyzRo

Alternatively if you're a bambu lab fanboi and love their stuff (like me), or need new parts ANYWAY for your bambu lab machine, consider using my affiliate link to help support me and my work on reverse engineering and crafting models. You can get 9% off currently with this link below!

https://us.store.bambulab.com/referral/3d-printer?ref=Q5CK92MYJOQO&skr=yes

Tagi