1 / 3
Gear shifter Knob - Skull - Toyota Aygo — zdjęcie 1
1 / 3

Gear shifter Knob - Skull - Toyota Aygo

Zamów wydruk tego modelu

Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.

Wstępna wycena dla PETG

5,35 € – 6,54 € netto (bez VAT)

Dla pliku: V4_GearShifterKnob_0.2mm_PETG_MINI_6h52m.gcode

To wstępna wycena jednego pliku. Dokładną cenę poznasz przed zamówieniem.

Plik i założenia wyceny

Plik użyty do wyceny

Średnia wycena orientacyjna: 5,94 € netto (środek widełek).

Masa podana przez autora
59 g
Czas druku podany przez autora
6,87 godz.
Materiał u źródła
PET
Materiał wyceny
PETG
Drukarka wyceny
Bambu Lab P1S - 0.4 nozzle
Proces wyceny
0.20mm Standard

Orientacyjna wycena wyłącznie wybranego pliku, oparta na masie i czasie druku podanych przez autora. Warianty plików nie są sumowane. Ostateczna cena zostanie obliczona po analizie pliku.

Zapisane na tym urządzeniu.

A new Gear Shifter Knob for my Toyota Aygo in the form of a human skull.

Ocena
5 / 5
Polubienia
117
Pobrania
1139
Wydruki
2
Wyświetlenia
6688
Oceny
2

Aktualizacja u źródła:

Informacje o modelu

Źródło
Printables
Kategoria
Automotive
Licencja
Creative Commons — Attribution — Share Alike

I printed a skull found on thingiverse (https://www.thingiverse.com/thing:518109/files), and we got the idea to use it as a gear shifter knob for my car, as I had already woodturned a shifter a while back.

The skull is scaled to 40% of the original, the “Cutout for Hexnut” is used as a negative space within Prusaslicer, as I dont have the CAD-program/computing power to change the actual skull-stl-file. The Cutout for Hexnut has to be scaled back to normal size when importing! (lenght of 55 mm). I just moved the cutout in place by eye, this worked fine.

The skull is printed in black PETG and supports on the buildplate. The supports where a bit difficult to remove, so you might experiment without them.

The nut (M12*1,25 - special fine thread) just fits into place, I secured it with a few drops of CA-glue. I used a Nyloc-Nut to keep the knob from turning. The nuts where bought here: https://www.amazon.de/gp/product/B0822XSF2V/ref=ppx_yo_dt_b_asin_title_o01_s00?ie=UTF8&psc=1

The skull shape is very nice in the hand and works well as a shifter, additionally to looking absolutely fabulous and completely hilarious. You might want to tilt the head a few degrees less than I did (25 degrees).

Notice: The solidworks files were done with a students licence, so dont open them with a commercial licence!

Tagi