Flexi Spiny Bush Viper

3D model description

Measuring approximately 90cm long when printed at full scale and includes multiple versions for you to choose from.

Fully print in place with no supports or brim required, just choose your bush viper and print. Included is the fully 3D printed version or the glass eye version when you can stick your favourite choice of glass eyes to truly personalise your own bush viper.

Glass eyes can be purchased from large online retailers such as Amazon and required is 10mm glass eyes for full scale, 8mm for 80% scale and 6mm for 60% scale etc...

Extremely flexi and cute, he's one of the longest prints I've ever created, fits on most 3D print beds & the 60% version even fits on an A1 mini.

Includes bonus STL of the open mouth bush vipers, so cute!

3D printing settings

Includes fully 3D printed bush viper & glass eye bush viper - If you choose to print yours with glass eyes please use 10mm glass eyes (readily available online, I got mine from amazon) if using 8mm glass eyes please scale model to 80% and 6mm glass eyes to 60%.

Prints with default slicer settings but I recommend gyroid infill and z-hop enabled for printers with lower bed adhesion. It's a very long model and at full scale takes a long time to print, I enabled z-hop for safety reason to avoid any failures just incase.

Silk I recommend adding extra walls and printing at 60mm/s.

I also included the STL files for the open mouth bush viper, I decided not to use this model but included the STL file so you have the option to print your preferred bush viper.