Screw-down tabletop, wall, and ceiling mounted axle stands for MMU2 Auto Rewind Spool Holder
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
For more detail on my MMU2 enclosure mods, read my blog post here:…
- Ocena
- 0 / 5
- Polubienia
- 18
- Pobrania
- 148
- Wydruki
- 0
- Wyświetlenia
- 1929
- Oceny
- 0
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- Accessories
- Licencja
- Creative Commons — Attribution — Share Alike
For more detail on my MMU2 enclosure mods, read my blog post here: https://3dviking.wordpress.com/2018/11/23/enclosure-mods-for-the-mmu2
Space saving screw-down axle stands for VincentGroenhuis' ingenious filament unspooling protection system https://www.thingiverse.com/thing:3252111
Print instructions
Please note that there are three versions of these stands. The original version is intended to be screwed onto a horizontal surface and includes both single and double holder modules. The single module is symmetrical and can be mounted on either the right or the left without any modification.
The wall and ceiling mounted versions of these stands have 3 different STL's since the left and right single mounts are not interchangeable. You will need to enable supports "everywhere" for the double wall and ceiling mounts so that the overhangs in the axle inserts print correctly.
All of these mounts are designed for use with #8 pan head wood screws and #8 washers.