Lid Prop for Centauri Carbon w/ vented riser
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
Prop your glass lid open a little if you are also using a riser.
- Ocena
- 5 / 5
- Polubienia
- 20
- Pobrania
- 189
- Wydruki
- 5
- Wyświetlenia
- 1451
- Oceny
- 5
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- Other Printer Parts & Upgrades
- Licencja
- Creative Commons — Attribution — Noncommercial
First of all, I know it seems silly to make a lid prop for use on top of a vented riser.
Let me explain…..
I printed my riser with only 1 vented and 3 un-vented sides. I figured that it's easier to have the chamber get to and hold a temperature with only a smaller vent. This works great.
I figured that I would just remove the top for PLA printing. Here is the problem. With the lid weight gone the bowden tube has a habit of knocking the riser out of place. Once even far enough that the side piece fell off.
I thought about just gluing the riser together but I wanted to keep the option open to replace a non-vented side with a vented side down the line. So, I did this.
There is a shorter and a taller version.