Trianglelab USB-ADXL345 v1.1 mount for VORON Afterburner
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
Mount your sensor for Klipper resonance test. Mine is labeled "v1.1" but will likely fit any Trianglelab USB-ADXL345.
- Ocena
- 0 / 5
- Polubienia
- 1
- Pobrania
- 5
- Wydruki
- 0
- Wyświetlenia
- 62
- Oceny
- 0
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- Voron Parts & Upgrades
- Licencja
- GNU General Public License v3.0
Mount the sensor board during the resonance test only. The bottom of the mount is level with the tip of the nozzle as per the VORON Legacy CAD file. Verify homing won't bump it with another VORON, but your safe z homing distance should prevent collision even if it ends up lower than the nozzle.
The directions (x and y) are printed on the circuit board, and you will have to enter a negative (such as -x) if not facing the expected direction (right for x, back for y, up for z would remain positive).