Electronics Controller Box Air Vent
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
This Air Vent is similar to the Bud NBX-10911 but designed to 3d Printable. This vent will fit into an 11/16 drilled…
- Ocena
- 0 / 5
- Polubienia
- 31
- Pobrania
- 284
- Wydruki
- 1
- Wyświetlenia
- 1310
- Oceny
- 0
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- Electronics
- Licencja
- Creative Commons — Attribution — Noncommercial — Share Alike
This Air Vent is similar to the Bud NBX-10911 but designed to 3d Printable. This vent will fit into an 11/16 drilled hole.
Print Settings
Printer Brand:
Prusa
Printer:
I3 MK3S
Rafts:
No
Supports:
No
Resolution:
0.2
Infill:
10
Filament: Overture PETg White
Notes:
Printing this is pretty easy but will require PETg and TPU
Print Information =================Vent:
Vent should be printed upside down (threads pointing up).
Control the speed and the layer height. Layer Height: .2mm Speed: 35m
Nut:
The nut is designed to fix, but 3d printers are not perfect for tolerance, I had to print my nut at 107% on my MK3, 105% on my Ender 5 Pro.
You will want to print a few at different scales until you find the right fit
O-Ring:
This will need to be printed in TPU
Speed: 20mms
Category: Electronics