QIDI Q2 Poop Chute/Bucket
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
Clip-on poop chute for the QIDI Q2. Two sizes, no screws needed, quick to print and easy to clean.
- Ocena
- 4,571 / 5
- Polubienia
- 117
- Pobrania
- 2806
- Wydruki
- 8
- Wyświetlenia
- 7017
- Oceny
- 7
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- Other Printer Parts & Upgrades
- Licencja
- Creative Commons — Attribution — Share Alike
This is a clip-on poop chute/bucket for the QIDI Q2, designed to collect purge material neatly without any screws or permanent modifications.
UPDATED Small Version (RECOMMENDED PRINT):
Added Chamfers to improve Printability
Added Holes for Ventilation
Features:
No screws required – simple clip-on attachment.
Two sizes included –
• Small body: faster print, compact.
• Large body: holds more purge waste.
Quick print – ~2.5 hrs with standard settings.
Tested & verified – thanks to @caiodelgadonew for measurements, testing and feedback.
Print Settings (tested):
Layer Height: 0.2 mm
Nozzle Size: 0.4 mm
Material: Tinmorry Clear PETG
Supports: Print Upright, might require supports on the hinge, but personal preference
Print Time: ~2.5 hours
Tips & Notes:
PETG is recommended to reduce purge bits sticking; PLA works but may cause buildup.
Ensure you have clearance under the purge area before attaching.
For longer prints or multi-colour jobs, the larger chute is recommended.
The larger version is currently untested, although features the same clip.