Bike chain lock holder
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
Bicycle chain lock holder for ABUS
- Ocena
- 0 / 5
- Polubienia
- 9
- Pobrania
- 48
- Wydruki
- 0
- Wyświetlenia
- 539
- Oceny
- 0
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- Outdoor Sports
- Licencja
- Creative Commons — Attribution
I have an ABUS chain lock, but unfortunately, I have an ABUS chain lock. Unfortunately, my bike is missing a mount. So, I quickly constructed a lock mount. The lock is attached to the frame. The design required a lot of tinkering, and I continually improved it until I was satisfied with the result.
To attach the mount to the frame tube, you need two screws and nuts. One end of the bike lock is clicked into the mount. Then the lock is locked. Done!
Print Settings
Printer: Prusa I3 MK3S
Supports: No
Resolution: 0.3
Infill: 15 to 20%
Filament: Prusament PETG Jet Black
To reduce printing time, I started printing in 0.3 draft mode. Prusament PETG was used as filament. You can see the result in draft mode in the photos.