Card / Tile box (Fusion 360, parametric)
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
Parametric card box using Fusion 360 with a short tutorial on how to make your own custom sized box. I've included a…
- Ocena
- 4,5 / 5
- Polubienia
- 16
- Pobrania
- 128
- Wydruki
- 2
- Wyświetlenia
- 842
- Oceny
- 2
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- Board Games
- Licencja
- Creative Commons — Attribution — Noncommercial — Share Alike
Parametric card box using Fusion 360 with a short tutorial on how to make your own custom sized box.
I've included a standard deck box sized holder that can hold about 60 premium sleeved cards.
This is an old design, but still seems to work in Fusion 360.
Print Settings
Printer Brand:
Wanhao
Printer:
Wanhao Duplicator i3 Plus
Rafts:
No
Supports:
No
Resolution:
.3
Infill:
10%
Filament: Inland PLA How To ======
How to change a Fusion 360 parametric file.
I include this section because using this file to make your own custom card box is very easy. A limited version of Fusion 360 is free for hobbyists. You can google how to get a free license for personal use.
When you input the card measurements, add 1-3mm of wiggle room to the length and width so the cards will fit in the box better.Category: Toy & Game Accessories