Ticket to Ride Märklin Organizer
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
Organizer for Ticket to Ride Märklin / Marklin game. This is a vase mode print that is lightweight and fast to make.…
- Ocena
- 5 / 5
- Polubienia
- 6
- Pobrania
- 53
- Wydruki
- 1
- Wyświetlenia
- 1584
- Oceny
- 1
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- Board Games
- Licencja
- Creative Commons — Attribution — Noncommercial — Share Alike
Organizer for Ticket to Ride Märklin / Marklin game. This is a vase mode print that is lightweight and fast to make. It works with cards in sleeves and passenger tokens in coin capsules.
Use vase/spiral mode and set printer to 0.8 extrusion width (even with a .4 nozzle but be sure to increase the print temp at least 10-20 degrees) for best results.
Print 5x TtRM_45Train and 10x TtRM_Passengers if not using coin capsules. (See photo 3)
Print 5x TtRM_45Train; 4x TtRM_Passegers; 1x TtRM_YellowBox; 2x TtRM_RedBlackBox if using coin capsules. (See photos 2 and 4)
The passenger tokens fit in 15mm coin capsules, but I bought 16mm because they were dirt cheap and then printed a spacer. I've included the spacer in the files: TtRM_RingSpacer. DO NOT print the spacer in vase/spiral mode.
Remove some of the trains to lift the 45Train box out of the game box. If even removing the trains is troublesome, print some tweezers: https://www.thingiverse.com/thing:1081911
Please share your make if you print this. I'd love to see what you're doing.
Print Settings
Printer Brand:
Creality
Printer:
CR-X
Rafts:
No
Supports:
No
Resolution:
.32
Infill:
-0-
Filament: Inland PLA White
Notes:
Vase/spiral print. Use 0.8 extrusion width.
I bought extra trains off eBay so I can play the Ticket to Ride Asia cooperative variant with this beautiful collector's edition. Print 2 fewer Passenger boxes and 1 more 45Train box if you wish to do the same.
Category: Toy & Game Accessories