Circuit breaker distribution box decorative cover
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
Circuit breaker distribution box decorative cover with magnets
- Ocena
- 0 / 5
- Polubienia
- 0
- Pobrania
- 6
- Wydruki
- 0
- Wyświetlenia
- 111
- Oceny
- 0
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- Other House Equipment
- Licencja
- Creative Commons — Attribution — Noncommercial — Share Alike
In order to hide bad looking of my circuit breaker box, I've designed 3D shaped cover.
PETG is highly recommended.
Due to limited size of build plate, I've design the cover as two halves and made front/back as seperated files in order to avoid using any supports to achieve better surface quality. There are two magnets (8x3 mm)on top edge of back part, you can simply use two pieces of sheet metal to be aligned with magnets, and attach them to top surface of circuit breaker by double sided tape.
So you may easily remove the cover once needed to reach the circuit breaker itself.
Alignment pins are used to achieve easy gluing process for all 4 parts.
Inner size of the cover is 330x230 mm with 40 mm deep.