Desk Grommet 2-1/2" Biomorph Desk
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
Desk grommets and caps that have 3 different sized cable holes and a blank. There's 2 desk grommet sizes: 2.5" and…
- Ocena
- 0 / 5
- Polubienia
- 2
- Pobrania
- 29
- Wydruki
- 0
- Wyświetlenia
- 466
- Oceny
- 0
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- Office
- Licencja
- Creative Commons — Attribution — Noncommercial — Share Alike
Desk grommets and caps that have 3 different sized cable holes and a blank. There's 2 desk grommet sizes: 2.5" and 2-3/8".
Made to fit a Biomorph desk, which has 3 holes. The desk center hole is smaller for some reason. The Biomorph website sells a replacement grommet and cap they say is rotating to reveal 3 different-sized holes and a blank. That's not what my desk had, but I designed a cap that has 3 different-sized holes and a blank. The 3rd photo shows the printed desk parts on the left and the original on the right. The large 3d printed desk grommet can hold the original Biomorph desk cap.
Also there's a crank grommet 3/4" and cap for the crank handle holes in the desk.
I divided the files into A, B and C. A files are for the crank. B files are the 2.5" desk grommet and cap parts. C files are the 2-3/8" desk grommet and cap parts.
My 3 different-sized holes cap isn't supposed to spin in place. Lift it out, rotate and set it to the hole size you want.
Print Settings
Printer Brand:
Wanhao
Printer:
Wanhao Duplicator i3 Plus
Rafts:
No
Supports:
No
Resolution:
.32
Infill:
10%
How I Designed This
Tinkercad:rnrnhttps://www.tinkercad.com/things/fpWOszTbfUz
Category: Office