Baby Deathsong (httyd)
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
Flexible model of baby Deathsong from how to train your dragon.
- Ocena
- 0 / 5
- Polubienia
- 9
- Pobrania
- 59
- Wydruki
- 0
- Wyświetlenia
- 389
- Oceny
- 0
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- Other Art & Designs
- Licencja
- Creative Commons — Attribution — Noncommercial
Hello! I just started with 3D printing and this is my first model created in blender.
For this model, you need to print the left wing, the right wing + one body (depending on whether you want to use glass eyes or not). In photos, you can see both variants, on one I used 1.2mm glass eyes. After you print everything, you put wings on their place on the back without too much force. If you don't know which wing is left or right, just look at them and detail in the wings is always on the top side, like in the 3rd photo.
If you have some recommendations on how I can improve this model, please write it down.