Frame Mounting Solution 2040 / Sovol SV06(plus) and others
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
Remix of Bassamanator's original
- Ocena
- 0 / 5
- Polubienia
- 3
- Pobrania
- 12
- Wydruki
- 0
- Wyświetlenia
- 89
- Oceny
- 0
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- Other Printer Parts & Upgrades
- Licencja
- Creative Commons — Attribution — Noncommercial — Share Alike
I really liked @bassamanator's idea for a screwless frame mounting solution for 2040 profiles (as well as his repositories on github).
Originally I wanted to intergrate his solution into my lately remixed/finished Raspberry Pi housing (upload will follow during the next days) but after a test print I found there was a bit too much clearance between parts - especially for the desired one-sided mounting. So I had a closer look to the models and decided to change a few things which led to a play-less tight fit on my Sovol's profiles. In addition it provides 2.5mm less stack height (less distance to profile).
Parts were printed on a Sovol SV06plus (current Marlin 2.1.x bugfix) using Overture PETG (see incl. 3mf):
Layer height: 0.2mm
Temperature: 230°/225°C
Bed Temp.: 80°/75°C
Speed: 30-40mm/s
Infill: 20% (Rectilinear, 2mm anchor)
Walls: 2
Bottom/Top layers: 4/5
Depending on your bed's adhesion you may have to add a brim for the insert!