3D Printed and Leather Purse, Handbag or Clutch
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
Small handbag frame that can be closed with leather, denim or other material. Fun weekend crafting project for kids!
- Ocena
- 0 / 5
- Polubienia
- 28
- Pobrania
- 73
- Wydruki
- 0
- Wyświetlenia
- 1265
- Oceny
- 0
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- Women
- Licencja
- Creative Commons — Attribution — Noncommercial — Share Alike
I needed a gift and came up with this… it is a simple purse or handbag frame that can be skinned in almost any material. With this frame, some lacing and scraps of material you and your kids can have a fun and relatively easy weekend crafting project that will last them for years. Add a lightweight chain, a few D-Rings and a couple of embedded magnets and you're off to the runway!
In this case, I skinned this one with a piece of Stingray leather and some other scrap leather from my local Tandy store, and lined it with some faux suede. The frame has feet, as well as loops for a chain or clutch ring. And since I was using Ray as the material, I also made an inlay of a Ray on each of the sides, so I could glue in a pendant I found over on MakerWorld (https://makerworld.com/en/models/501936-manta-ray-pendant#profileId-417090) that I really liked.
The purse is small. But can be scaled up or down pretty easily. It uses angled thru-holes for the lacing that goes around the perimeter. This will hold a phone, wallet and a few small odds and ends with ease; but it is no bag of holding. In the end, the total cost was probably around $20 in material, for a unique handbag.
Print in the orientation shown. The only supports needed are on the chain hooks. I printed mine in solid PLA, but PETG, Flexible PLA, or a semi-rigid TPU would all work well for this application.
I also included one without the inlay for anyone who would like to create their own.
Enjoy!