1 / 4
BLACKPINK Pencil holder/ pen cup holder magnetic
Zamów wydruk tego modelu
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
This is a remix of another design that I tweaked to add spots for 27mm (diameter) magnets that are 4mm thick.
- Ocena
- 0 / 5
- Polubienia
- 2
- Pobrania
- 22
- Wydruki
- 0
- Wyświetlenia
- 122
- Oceny
- 0
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- Office
- Licencja
- Creative Commons — Attribution — Noncommercial — Share Alike
I printed this with my Elegoo Neptune 4 pro and changed colors on the layers. I used PLA and ironing settings for the front panels to make for a smooth finish, with 0.15mm layer height and 0.2mm first layer height. and I used PLA and 0.3mm layer thickness with 0.4mm first layer height without ironing for the base of the holder.