1 / 6
Milwaukee M18 18V Battery Connector Adaptor Adapter Module — zdjęcie 1
1 / 6

Milwaukee M18 18V Battery Connector Adaptor Adapter Module

Zamów wydruk tego modelu

Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.

Zapisane na tym urządzeniu.

Milwaukee M18 18V Battery Connector Adaptor Adapter Module

Ocena
0 / 5
Polubienia
21
Pobrania
190
Wydruki
0
Wyświetlenia
1165
Oceny
0

Aktualizacja u źródła:

Informacje o modelu

Źródło
Printables
Kategoria
Tools
Licencja
Creative Commons — Attribution

This battery adapter is used in multiple of my other designs.

For Bosch 18V Professional Batteries, see my design here: https://www.printables.com/model/427974/

For Makita 18V Batteries, see my design here: https://www.printables.com/model/436132/

 

Some people have made the metal contacts with sheet metal tabs or some random connector pins, I have taken a different route here. I use two thin shim washers as contacts in this design.
The washer must not be thicker than 0.8mm, because the original contact is also only 0.8mm and I do not want to stretch the spring contacts in the battery more. In this design I used 0.5mm thick shim washers, but changing the dimension in CAD should not be a big problem.

The wires can be soldered to the contact shim washers first.

 

Required Material

  • Designed to fit two thin DIN 988 shim washers 12x18x0.5mm (German: Passscheibe)
  • The two contact modules can be secured with M3x10 screws (thread directly in PLA)

 

1x Power Switch:

Switch size 21 x 15mm
Front panels cutout 19.4 x 13 mm

https://www.conrad.ch/de/p/tru-components-wippschalter-tc-r13-66a-02-250-v-ac-6-a-1-x-aus-ein-rastend-1-st-1587515.html

 

4x Countersunk Screw:

M4 x 12mm
M4 x 20mm

 

Designed in Onshape:

https://cad.onshape.com/documents/a62b52dd01e0ab4bb20cebe0/w/be7d92a55989c1143ceac5c2/e/2effbf37f38e7d7b89f4ce3c?renderMode=0&uiState=68a76a0709647b5f45806ee3

 

Tagi