Credit Light Shroud for Bally Solid State Pinball Machines
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
Eliminate light bleed through on your Bally SS apron after replacing incandescents with LEDs!
- Ocena
- 0 / 5
- Polubienia
- 2
- Pobrania
- 12
- Wydruki
- 0
- Wyświetlenia
- 60
- Oceny
- 0
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- Other Toys & Games
- Licencja
- Creative Commons — Attribution — Noncommercial — Share Alike
Sometimes when using LEDs for the credit light in the apron, you see some of the illumination peeking out on the left side and through the underside of the instruction card. Using this shroud eliminates that and focuses the light upward to the underside of the credit lens.
Use the slit on the side to accommodate the lamp socket wires (if necessary, depends on the lamp socket type). Secure the shroud to the playfield with double sided tape to ensure easy reversion.
The 2.5" tall STL is for Bally aprons that are on risers (such as Flash Gordon, pictured). The 1.5" tall STL is for Bally aprons that site directly on the playfield (such as Mata Hari, Eight Ball Deluxe, Black Jack, Night Rider, and countless others). Or resize/scale as you like.
This can also be used in Williams or any other solid state pinball machine that has a similar layout and positioning for the credit lamp lens.