1 / 1
Banana Pi BPI R4 92mm fan cover.
Zamów wydruk tego modelu
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
A cover to keep the temps down.
- Ocena
- 0 / 5
- Polubienia
- 4
- Pobrania
- 23
- Wydruki
- 0
- Wyświetlenia
- 142
- Oceny
- 0
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- Other Gadgets
- Licencja
- GNU General Public License v3.0
A cover to keep the temps down. Made for a 92mm Noctua fan. Two versions of the file. For different placement of the hole for wires to go through. I wired it up to the internal 12V port (CN19) Far right pin is 12V, middle two are ground, far left is 5V if you want less noise.