4" x 6" Metal Cut Bandsaw (Harbor Freight Style) Chip Tray Holder
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
Bracket allows the use of a steel cookie sheet to serve as chip tray.
- Ocena
- 0 / 5
- Polubienia
- 2
- Pobrania
- 5
- Wydruki
- 0
- Wyświetlenia
- 85
- Oceny
- 0
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- Tools
- Licencja
- Creative Commons — Attribution — Noncommercial
Bracket consists of 4 parts, two cross braces (right and left) and two support brackets (front and rear). Bracket components are assembled using 8 - 4mm x 16mm countersunk cap screws, flat washers, and hex nuts. Once assembled, bracket is attached band saw casting using 8 - 4mm x 16mm socket-head cap screws and flat washers. Band saw casting must be drilled and tapped to accept the 4mm screws. I mounted the front bracket approximately 4" from the rear edge of the power switch housing (see pic) and it seems to collect most all chips.
Cookie tray slides in and out to allow for emptying. I used the below cookie sheet, but I would imagine there are probably many others with the same dimensions would work.
Baking Sheet Pan, Joyfair Stainless Steel Cookie Sheet Toaster Oven Tray, Professional Bakeware for Cookie/Bacon/Bread, Rolled Rim & Mirror Finish, Rust Resistant & Dishwasher Safe (10.4 Inch). Interior dimensions of tray are listed at 7.9" x 10.2" x 1" deep. Amazon link to cookie sheet I used is below.
https://www.amazon.com/dp/B0C6DSZWHS?th=1