Topeak Handelbar Bag bracket for 12mm rack
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
Bracket to attach Topeak Handelbar Bag to ICE Sprint rack, and possibly other 12mm bicycle racks.
- Ocena
- 0 / 5
- Polubienia
- 3
- Pobrania
- 5
- Wydruki
- 0
- Wyświetlenia
- 108
- Oceny
- 0
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- Outdoor Sports
- Licencja
- Creative Commons — Attribution — Noncommercial — Share Alike
I made this bracket to attach Topeak handlebar bags to my ICE Sprint Trike 12mm cycle racks. On my short rides I don't want to use my big panniers, and would prefer to use my smaller Topeak handlebar bag.
This quick remove bracket fits the ICE 12mm rack to attach Topeak handlebar bags, and copies elements of the Topeak Fixer 8.
NOTE. The ICE rack has welded bosses for an additional top rack. This pieces screws through one of the bosses. I had to make clearance for the boss welds, so I created spacers to go on the side without the boss/weld which allows the bracket to fit to either the left or right rack.
This bracket should fit other 12mm racks. However, if not going through a fixed attachment tab or boss, I expect that spacers will be need on both sides to keep it tight. I used the springs and screws from my unused Topeak Fixer 8, and added m5 x 25mm thumb screws and nuts for quick removal.
I'm uploading the .stl and .STEP