Deck Case V2: Slimmer Friction-Fit & Carabiner Lock for Playing Cards
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
Slimmer friction-fit, two-part playing-card deck case that uses less filament and holds a standard deck in its original
- Ocena
- 0 / 5
- Polubienia
- 1
- Pobrania
- 14
- Wydruki
- 0
- Wyświetlenia
- 93
- Oceny
- 0
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- Organizers
- Licencja
- Creative Commons — Attribution — Noncommercial
A 3D-printable, two-piece case that snugly holds a full 52-card deck in its original packaging. Now slimmer for reduced bulk and optimized to use less filament, the halves slide together via friction and can be locked using a carabiner threaded through the top hole—ideal for secure storage and on-the-go portability.
🔧 Key Features Friction-fit interlocking halves—no glue or hardware needed Top hole for carabiner to prevent separation Slimmer, more compact profile tailored for a standard card box Clean, minimal-part design with reduced filament usage—simple print and assemble
🧷 Print Settings Used Printer: Creality K1C, a CoreXY model capable of up to 600 mm/s with enclosed chamber, auto-leveling, AI camera, and tri-metal nozzle support for a wide range of materials Filament: Elegoo Rapid PLA+ (PLA Plus) noted for enhanced fluidity, toughness, high flexural modulus, and precise diameter control (±0.02 mm) — supports speeds up to 600 mm/s Layer height: 0.20 mm Infill: 15% crosshatch pattern Walls (perimeters): 3 Top & bottom layers: 3 layers each Support & Adhesion Strategy Supports: PrusaSlicer’s “Organic supports” enabled for overhangs above ~30° Orientation: Each half printed twice—once front-down, once back-down—for best surface finish and support contact Bed adhesion: Mouse-ear brims (localized brim ears) used on all corners for stable adhesion with minimal cleanup
🧰 Print & Assembly Notes Setting Details Tolerance gap ~0.2 mm—adjust per your printer calibration/filament Material recommendation Elegoo Rapid PLA+ (as used) or standard PLA; PETG/ABS for more durability Post-processing Light sanding optional for improved fit; generally no cleanup needed Final assembly Slide halves together, loop a lightweight carabiner through top hole
ℹ Usage Tips Use a lightweight carabiner for minimal bulk If fit is overly tight, lightly sand mating faces or slightly increase tolerance Clip the assembled case onto gear loops or backpack straps for easy transport