1 / 4
Tesla Model Y Gen 1 (2019-2024) Trunk Lid/Shelf Feet — zdjęcie 1
1 / 4

Tesla Model Y Gen 1 (2019-2024) Trunk Lid/Shelf Feet

Zamów wydruk tego modelu

Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.

Zapisane na tym urządzeniu.

Feet for the Tesla MY 2019-24 Trunk Shelf for (I think?) 7 seater model

Ocena
0 / 5
Polubienia
1
Pobrania
14
Wydruki
0
Wyświetlenia
771
Oceny
0

Aktualizacja u źródła:

Informacje o modelu

Źródło
Printables
Kategoria
Garage
Licencja
Creative Commons — Attribution — Noncommercial

So I'm not sure what to call this model really. On our 2021 Model Y 7 Seater the long angular support piece for the trunk lid kept coming off. Instead of buying a new one I decided to just model up some feet that I can attach using the existing insert nuts in the shelf. I'm not familiar enough with the Tesla Model Y range - this may be only applicable to 7 seaters, but if you look through the photos, I'm sure you'll recognize if it fits your MY or not.

There are actually a few benefits of this design over the factory one: 
1) the lack of interference in the middle gives you easier access to the under-floor storage
2) the feet actually push away from the 3rd row of seats, giving more space for the seats to lift up
3) the feet do a better job of keeping the shelf upright when accessing the under-floor storage

As this is going into a car with possibly higher temperatures, PLA is not recommended - PETG/ABS/ASA are all going to do far better. I actually used PETG-CF for this which had a really nice matte finish. 

Printing Instructions:

  1. I only included one side of the foot - you'll need to mirror and print a second copy
  2. The spacers are there for the missing carpet where the metal brackets sat before. You'll need 3x of the shorter ones, and 2x of the longer ones. Should be pretty self explanatory once you start putting it together I think?
  3. The model is designed to use the existing hardware. 

Tagi