Naruto Obito Masked Man Mask – 3D Printable Cosplay Prop
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
Iconic Masked Man mask worn by Obito in Naruto. A smooth, printable prop perfect for cosplay and anime fans.
- Ocena
- 0 / 5
- Polubienia
- 21
- Pobrania
- 133
- Wydruki
- 0
- Wyświetlenia
- 531
- Oceny
- 0
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- Masks
- Licencja
- Creative Commons — Attribution
Description
This Masked Man Mask is a faithful 3D printable replica of the mask worn by Obito Uchiha during his mysterious appearances in the Naruto series. Designed in Shapr3D with smooth geometry and clean contours, it’s ideal for cosplayers who want an accurate yet easy-to-finish prop. The mask’s symmetrical form ensures consistent results on most FDM printers, while its hollow design makes it lightweight and wearable. It can be printed in one piece or split for smaller printers, and after sanding and painting, it captures the sleek, ominous look that made Obito’s Masked Man persona so memorable.
Print Tips
- Print vertically with supports enabled.
- Recommended layer height: 0.2 mm for smooth curves.
- Use 3–4 perimeters and ~15% infill for strength without excess weight.
- PLA works well; PETG recommended for durability.
- Sand and prime before painting for a flawless anime finish.