Arca Swiss Batterygrip Canon
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
Grip for arca swiss rail with Battery compartment for Canon LP-E6NH / LP-E6N Batteries. Battery Grip for Canon R7
- Ocena
- 0 / 5
- Polubienia
- 2
- Pobrania
- 8
- Wydruki
- 0
- Wyświetlenia
- 117
- Oceny
- 0
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- Photo & Video
- Licencja
- Creative Commons — Attribution — Share Alike
This camera grip can be attached to any arca swiss compatible plate or cage.
The Grip has no electric connection to the camera.
It can store one LP-E6N or LP-E6NH battery as well as either an additional SD-Card, or the Allen Keys to attach/detach the Battery grip.
The Allen Keys are held in by magnets which could damage the spare SD-Card so I would recommend to choose between the SD-Card and the Allen Keys.
Additional Parts:
Allen Key 2.5
Allen Key 4
2* 5x5x5 mm neodymium magnet
Screws:
2* M3x45
1* 1/4"x10
1* M4*12
2* M3 Nuts
The Grip clamps to the arca swiss rail and can additionally screwed in the plate/cage from the bottom.
To keep the Battery snug in there and keep it from wobbling around and dampening it, I've build in enough space for two layers of foam rubber. There is a dxf file for cutting those foam rubbers.
I recommend to print it with fuzzy skin fro which I included a modifier geometry.