Corsair Frame 4000D PCI/PCIE cover
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
Rear PCI slot cover for Corsair Frame 4000D case.
- Ocena
- 5 / 5
- Polubienia
- 32
- Pobrania
- 344
- Wydruki
- 3
- Wyświetlenia
- 1585
- Oceny
- 1
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- Computers
- Licencja
- Creative Commons — Attribution — Noncommercial — Share Alike
PCI/PCIE slot cover for the Corsair Frame 4000D case.
The hole felt a little weird for me - I figured I would try to design a cover for it.
I would suggest printing it inside face-down because that way you will manage to hide most of the traces that may be left by supports.
If you have a multi-material system, using PETG as an interface layer for PLA (or the other way around) will make it easier to remove the supports.
Be careful when working off the supports for the screw hole - it is quite thin because otherwise the screw itself might not reach the threads on the case.
Enjoy! ;)