Heart Box
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
A simple box with decorative heart cutouts.
- Ocena
- 0 / 5
- Polubienia
- 2
- Pobrania
- 7
- Wydruki
- 0
- Wyświetlenia
- 51
- Oceny
- 0
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- Organizers
- Licencja
- Creative Commons — Attribution
My wife asked for something to organize the food extract bottles so created the red with white racing stripes box. Then she asked for a slightly wider box to hold her tea sweeteners, the blue silk box. Then I revamped the design to be fully parametric, including the size of the hearts, demonstrated in the second extract box (red/white with larger hearts). Finally I tossed in some golden rectangle (89/55 : 1) boxes in 250, 200, and 150mm lengths.
Along with the STLs I include three slicer files (for PrusaSlicer, OrcaSlicer, and BambuSlicer). I'm not a PrusaSlicer user so didn't see how to add the racing stripes with it. The other slicers are easy by cutting the model on height (3, 5, 6, 7, 46, 47mm) then changing the filaments on every other part.
For printing, default .2mm layers works fine with slim tree supports needed for the hearts.
The FreeCAD design document is included. Simply add any config you want to the configuration table in the params spreadsheet, then select the configuration using the Body's Model property. There are detailed instructions in my DriverStand model : https://www.printables.com/model/1385798-driverstand
The heart sketch was fun. I ended up with a fully constrained sketch using just arcs and constraints. Note there is only one dimensional constraint, defined in the configuration table.
