1 / 3
Sea Doo Bearing and Seal Installer Tools — zdjęcie 1
1 / 3

Sea Doo Bearing and Seal Installer Tools

Zamów wydruk tego modelu

Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.

Zapisane na tym urządzeniu.

I designed, printed and used these tools to install new jet pump bearings and seal on my 2002 Sea Doo GTI.

Ocena
0 / 5
Polubienia
3
Pobrania
11
Wydruki
0
Wyświetlenia
96
Oceny
0

Aktualizacja u źródła:

Informacje o modelu

Źródło
Printables
Kategoria
Tools
Licencja
Standard Digital File License

I printed them with 100% infill using PLA. I froze the bearings/seal and warmed the jet pump housing in my kitchen oven at 200F. Then I used a dead blow plastic mallet to pound them in. Tools are still in great shape and show no deformation or damage. Bearings and seals are in perfect nominal position per Sea Doo shop manual.