1 / 2
Panty's gun Backlace from Panty and Stocking
Zamów wydruk tego modelu
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
This is a cosplay prop gun for Panty from the show Panty and Stocking.
- Ocena
- 5 / 5
- Polubienia
- 2
- Pobrania
- 57
- Wydruki
- 1
- Wyświetlenia
- 399
- Oceny
- 1
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- Cosplay & Costumes in general
- Licencja
- Creative Commons — Attribution
Printing
PLA, 3 walls since this will be handled quite a bit.
Split in half using dowels in your slicer, then re-combine and glue together the two pieces. I printed them face down on a smooth PEI sheet (not for PETG!) to assist with gluing. Clamp the two halves together until the glue has cured.
Do not clean up edges or sand before gluing, or you may end up with small gaps at the joints.
Paint to match the gun in the show.