TMNT x Hello Kitty - Toy Stand
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
Wanted a way to display some of the floating TMNT x Hello Kitty McDonalds Toy figures
- Ocena
- 0 / 5
- Polubienia
- 25
- Pobrania
- 40
- Wydruki
- 0
- Wyświetlenia
- 391
- Oceny
- 0
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- Action Figures & Statues
- Licencja
- Creative Commons — Attribution — Noncommercial — Share Alike
Wanted a way to display some of the floating TMNT x Hello Kitty McDonalds Toy figures. Drew this up and so far it works great!
Couple of notes, the base prints great but the L-beam might need a brim. I own a P1S so I also slowed the speed down from 100% to 50%, others may not have this problem but it worked for me! Another note for assembly, when you place the L-beam into the base, you may need to tilt the beam a bit to find the toys balance. I designed it so you could move it around to find its sweet spot, especially if you have other toys.
There's also an option of two different bases. One has a slightly tighter inner tolerance than the other. Wanted to compensate for different types of printers/print quality. Both work fine for me!
EDIT: Added another base. This one is wider with the hole moved backwards by 4 mm to give the toy better balance/stability. I recommend printing this one with the L-beam. Let me know if you have any problems :)
Let me know if you have any suggestions for changes!