Ryobi Die Grinder Collet Wrench Tool: PSBDG01B
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
A collet wrench that I often misplace for the awesome Ryobi Die Grinder. Width of Jaws-17.330mm
- Ocena
- 0 / 5
- Polubienia
- 2
- Pobrania
- 4
- Wydruki
- 0
- Wyświetlenia
- 61
- Oceny
- 0
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- Tools
- Licencja
- Creative Commons — Attribution — Noncommercial — Share Alike
I kept loosing my Ryobi 18v Die Grinder Collet wrench and had to search out for the adjustable wrench instead until I got tired of that and this replacement was made. The fit is extremely tight in PLA and PETG. I had to scale 101% when printing in PA6-GF / CF. You will need maximum shells and close to 100% infill if you plan on using it often paired with a heavy duty filament like ASA/ ABS / PA6-GF/ PA6-CF. I would not advice PLA/ PLA-CF / PETG-CF as they are weak and brittle and maybe will only work once, if that.
Width between wrench jaws is 17.33mm and may fit other die grinders, electric or pneumatic.