Modular storage system for cube luggage racks
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
A customizable storage system for luggage racks from ACID (CUBE Bikes)
- Ocena
- 0 / 5
- Polubienia
- 7
- Pobrania
- 21
- Wydruki
- 0
- Wyświetlenia
- 304
- Oceny
- 0
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- Outdoor Sports
- Licencja
- Creative Commons — Attribution — Noncommercial — Share Alike
This model is an customizable storage system for the luggage rack for your Cube bike. It consists of a frame mounted on the rack, a snack system and a additional storage box in currently two sizes (50mm and 15mm).
Hints for seperate parts
The Frame can easily be clicked onto the rack. For additional hold you can fasten it with eight round magnets (10x3mm) or with cabel ties. This is especially recommended for use in uneven tracks. Else you can use TPU parts in the magnet holes to eliminate any rattling when crossing curbs.
The bottom of the different snack holders has to be aligned with the frame in the Slicer. To print the honeycomb grids please change the print settings to ‘0 solid bottom and top layers’ and 15% honeycomb infill. It is recommended to print this parts with 3 Perimeters.
The same settings as for the bottom parts of the snack holders are required for the spacers and seperators.
Printer settings
All parts should be printed with
.15mm layer hight
no supports or brims nessesary
15% infill
3 perimeters
For the grid parts the settings have to be changed like discribben above.
Required metal parts
M3x30mm screws (two times)
M5x25mm svrews (four times)
M5 nut (best with self securing ring (four times))
Modification
You can find STEP files for all models. You can use them to design your own custom holders or modify the existing ones