1 / 2
43mm Hygrometer TH05 Mount for Anycubic Ace PRO (NEW VERSION)
Zamów wydruk tego modelu
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
Refined mount for a sensor from Aliexpress and similar sources
- Ocena
- 0 / 5
- Polubienia
- 15
- Pobrania
- 73
- Wydruki
- 0
- Wyświetlenia
- 427
- Oceny
- 0
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- Anycubic Parts & Upgrades
- Licencja
- Creative Commons — Attribution
SzczegółyPliki (2)Wydruki i komentarze (Wydruki: 0) (Komentarze: 0)Remiksy (0)Kolekcje (10)Powiązane
Mount for the new version of ACE PRO from the Kobra S1 COMBO set, designed for a temperature and humidity sensor 43mm from Aliexpress.
The thick reinforced walls hold firmly on the filament guide. I recommend printing with PETG and advise against PLA, as it may deform during drying at maximum temperature.