Brinkley Cup Holder insert with remote holder
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
Inserts into the wireless charger on the couch, holds two cups and a place to store remote(s)
- Ocena
- 5 / 5
- Polubienia
- 13
- Pobrania
- 386
- Wydruki
- 3
- Wyświetlenia
- 1651
- Oceny
- 3
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- Outdoor Sports
- Licencja
- Creative Commons — Attribution — Noncommercial
Cup holder inserts into armrest wireless charger. Design is close to tight as you insert it so it does not move. I used a little strip of anti-slip mat meant for lining cabinets to tighten it up the rest of the way to avoid damaging the finish of the charger. Front has an included remote holder.
Printed with 8% Gyroid infill at .25mm using PLA on a .4mm nozzle. The model is printed at 45 degrees to avoid support requirements using a support keel that is easily snapped off the bottom. Tree supports were used for the very ends of the back.