Troodon Cable Chain Mount for Galileo 2.0 Extruder
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
A modification, a remix of the bracket that holds the Troodon2.0 cable chain with PCB board for the print head
- Ocena
- 0 / 5
- Polubienia
- 1
- Pobrania
- 13
- Wydruki
- 0
- Wyświetlenia
- 97
- Oceny
- 0
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- Other Printer Parts & Upgrades
- Licencja
- Creative Commons — Attribution — Share Alike
Hello all,
I made modification, a remix of the bracket that holds the Troodon 2.0 cable drag chain with the original PCB board on it for the XOL print head with Orbiter 2.0 extruder (in reality the Galileo 2 Standalone (G2SA) and it is designed as an Orbiter 2.0).
I decided to upgrade my printer to XOL tool head with Phaetus Rapido+ UHF hotend and extruder Orbiter 2.0 (in this case actually a Galileo 2 standalone extruder). There is actually a project for the bracket that can be used to attach the original Troodon cable drag chain. The problem is that I haven't found a suitable solution for attaching the PCB board to the XOL. There are several EBB mounts but Troodon PCB is different as form and I want to used the original one. That's why I decide to make a remix of the original project that found here: https://www.printables.com/model/262438-voron-2-ldo-orbiter-drag-chain-mount
I made the bracket so that it can be attached with nuts, for this purpose the attachment to the Orbiter head will only be possible if you use longer bolts. The PCB board is intended to be mounted using M3 bolts that are screwed into brass inserts.
I am also uploading the entire Fusion 360 project, so anyone who wants can edit it my remix or make it even better. If there is any problems with the design please fill free to edit it for your purposes! I am not an engineer and this is made firstly to satisfy my personal ideas. My only condition is that to share your design here too.