Drive rubber ring for NOBLEX Pro6 150 camera
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
This is the optimized version of the drive ring.Compare with the old version:…
- Ocena
- 0 / 5
- Polubienia
- 0
- Pobrania
- 15
- Wydruki
- 0
- Wyświetlenia
- 50
- Oceny
- 0
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- Photo & Video
- Licencja
- Creative Commons — Attribution — Share Alike
This is the optimized version of the drive ring. Compare with the old version: https://www.thingiverse.com/thing:6956903 The slightly taller version printed with gray TPU filament is shown in the image above (old version: black in the image above). The outer contact surface is higher, so that the drive functions more optimally due to the higher friction. The drive ring is somewhat more delicate and rather difficult to print.
Print Settings
Printer Brand:
Anycubic
Printer:
Kobra 2
Rafts:
No
Supports:
No
Filament Material:
TPU
Notes:
TPU filament is from Geetech with a hardness of 95A.
The best settings are: speed 50 mm/s and temperature 200 degrees.
The speed must be slow because the outer ring on which the whole thing rests on the print bed is only 0.4 mm thick. That is, only one filament width.
When slicing, please ensure that the frame inside the ring with the bevelled profile faces the printing platform. This is designed so that no supports are required.
The seam created during printing must then be removed so that the rotating lens head moves smoothly. This is best done under a magnifying glass with a razor-sharp blade. In any case, I believe that this drive ring will be more stable and durable than the original. The camera now works perfectly.
Category: Camera