Planfilm cassette for Decrullo-Nettel 10x15
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
For Deckrullo-Nettel 10x15, approx. 1920 by "Nettel Camerawerk", Germany.Modified reproduction of the original…
- Ocena
- 0 / 5
- Polubienia
- 1
- Pobrania
- 7
- Wydruki
- 0
- Wyświetlenia
- 38
- Oceny
- 0
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- Photo & Video
- Licencja
- Creative Commons — Attribution — Noncommercial
For Deckrullo-Nettel 10x15, approx. 1920 by "Nettel Camerawerk", Germany. Modified reproduction of the original cassette and slider. The cassette is designed for sheet film (i.e. no glass plates, can be used directly without sheet film inserts). The support distance corresponds to the original cassette with flat film insert.
The slider in 3D print is only a makeshift solution due to the excessive flexibility, the original slider fits well. The width of the groove is 0.6mm, a metal sheet with a width of 0.3 to 0.5 should therefore be suitable. It was printed with matt black PLA. After printing, it is important to deburr all edges before assembling and, above all, to sand the tracks for the slider smooth with sandpaper (grain approx. 80) until the slider can be moved without much resistance. The areas to be joined generally have 1/10 mm play, so that everything fits quite well after deburring. The parts were glued together with ordinary universal glue. Black self-adhesive velvet wallpaper was used as a seal. The size can be found in the indentations for the seals. As the side profiles have hanging surfaces everywhere, it is advisable to let them rest with the outer surface on the print bed and to switch on supports in the slicer. When removed after printing, the rough surface does not interfere with the functionality of the cassette. For stability and light tightness it is advantageous to print the cassette with 1.2mm thick walls with 40% infill.
Category: Camera