1 / 2
End mill tray 1x18 layout for 3/8 shank x 3-1/4 long double-ended
Zamów wydruk tego modelu
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
Modification of TaylorsMake's end mill tray to hold bare US standard 3/8" shank x 3.25" long double-end mills.
- Ocena
- 0 / 5
- Polubienia
- 14
- Pobrania
- 88
- Wydruki
- 0
- Wyświetlenia
- 687
- Oceny
- 0
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- Tools
- Licencja
- Creative Commons — Attribution
SzczegółyPliki (2)Wydruki i komentarze (Wydruki: 0) (Komentarze: 0)Remiksy (0)Kolekcje (25)Powiązane
Modification of TaylorsMake's end mill tray (from TV) to hold bare US standard 3/8" shank x 3.25" long double-end mills. The mods are:
- Higher density single-row layout holding 18 tools without the individual plastic cases
- Thicker perimeter and dividing walls for a bit more stiffness
- Compartments are 0.4" high so trays can be stacked
The pre-sliced gcode is for 0.3 resolution, 20% infill, and with a modifier slab that suppresses the top/bottom shells to leave the open honeycomb.
Bumping the infill from 20 to 25% will produce larger honeycomb cells; you might like that look.
Print Settings
Printer Brand:
Prusa
Printer:
I3 MK3S
Rafts:
No
Supports:
No
Resolution:
0.3
Infill:
20%
Filament: generic PETG or PLA