Germany FC logo AXM
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
Germany FC logo model for multicolor 3D printing.
- Ocena
- 0 / 5
- Polubienia
- 2
- Pobrania
- 29
- Wydruki
- 0
- Wyświetlenia
- 58
- Oceny
- 0
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- 2D Plates & Logos
- Licencja
- Creative Commons — Attribution — Noncommercial — Share Alike
Here is Germany’s National Football team logo for multicolor 3D printing. The logo has 4 golden stars that represent its 4 World Cup Championships. This model has 7 colors for a challenging print.
Designing the model
The logo was obtained online in vector format with some modification to group the stars and crest, and was converted to svg format for Fusion 360. All the elements of the logo were originally extruded to a height of 0.6 mm. Considering that the layer height used is the standard as 0.2 mm, that brings to 3 color passes during the printing session with 16 color changes.
Slicing the model
The model was sliced on Bambu studio for a Bambulab A1 printer with AMS Lite. The first demo was unsuccessful because two colors conflicted on each other. Unfortunately, the colors in conflict were assigned to the same AMS Lite spool.
Then I decided to reduce the number of color changes by reducing the height of the model elements, from 0.6 to 0.4 mm extrusion. That made a big difference because that resulted in only 11 color changes with only 2 passes of all the colors.
I am including in detail my setup of the filament colors used, the color spool location and the order of the 11 color changes for this particular model.
Filament 1 white
Filament 2 black
Filament 3 red
Filament 4 dark grey
Filament 5 light grey
Filament 6 gold
Filament 7 yellow
AMS Lite
1 Dark Grey
2 Light Grey and Red
3 Yellow and Black
4 White and Gold (Once white is done, please remove it and change it to Gold for the entire print)
Color Changes Order
white, light grey, yellow, gold, dark grey, red, black, light grey, yellow, gold, dark grey, red.
INFO FOR BEGINNERS: You can only use four colors on the AMS Lite, but if there are more colors on the model then some colors will need to share a spool. For example, following the color order, once light grey is used, you’d need to remove it and add the red filament on same spool. Then, once red is used, you’d need to remove it and place light grey back again. Then this will be changed one last time for red. The same applies to the yellow/black spool.
Please share your comments and photos.