1 / 2
Filament Guide_608 Bearing_Swivel Rail Mount — zdjęcie 1
1 / 2

Filament Guide_608 Bearing_Swivel Rail Mount

Zamów wydruk tego modelu

Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.

Zapisane na tym urządzeniu.

A filament guide that allows you to adjust it's position to wherever you need it on your spool line.

Ocena
0 / 5
Polubienia
0
Pobrania
14
Wydruki
0
Wyświetlenia
65
Oceny
0

Aktualizacja u źródła:

Informacje o modelu

Źródło
Printables
Kategoria
Accessories
Licencja
Creative Commons — Attribution — Share Alike

I needed something that could easily move to different positions along my filament line and could swivel so it was at the correct angle to provide the least amount of friction.

This filament guide, when used with the Multipoint Rail system from Multiboard, can move and swivel to any place I need it along my filament line.  I didn't really want to have lots of different guides along the roof of my work area, so when my husband said, “You need a rail.”, I started remixing!

I used the Screw-on Mount-Multipoint Rail and the Screw-on Mount-Rail Rings for the rail portion that it attaches to.

No supports are needed to print, just make sure you turn the pin on it's head.

Like the design?  Buy me a coffee!

Tagi