LED bar (Kitchen cabinet LED) holder for 2020 extrusion
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
"Kitchen cabinet" led bar (https://nl.aliexpress.com/item/1005003166484007.html) mount for 2020 extrusion
- Ocena
- 0 / 5
- Polubienia
- 1
- Pobrania
- 3
- Wydruki
- 0
- Wyświetlenia
- 80
- Oceny
- 0
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- Voron Parts & Upgrades
- Licencja
- Creative Commons — Attribution
I bought some cheap 24v kitchen cabinet led bars (https://nl.aliexpress.com/item/1005003166484007.html) and they differ in size from the one I already had that Formbot ships. They are slimmer and do not protrude from under the 2020 extrusion which is ideal to run them along the entire extrusion and not have them interfere with the Z-idlers.
This is a mount for them that angles them 45°, just decap the ends and put the printed mount on. Bolt to the extrusion with an M3x20 and a M3 Hammer T-nut. You don't need to route the wires through in advance, there is a slot to push them in, but when tightening make sure the wires align with the extrusion slot so they don't get clamped between the mount and the extrusion.
The ones I linked are 50cm so they need to be cut to length at the segments (like a led strip), but a pair of pliers easily does that and the aluminum holder is easily cut too
Make sure to mirror the second holder in your slicer to fit both ends.